In addition to batteries, motors, controllers, and chargers, these four major fittings are also just needed for electric moped with pedals daily maintenance.

Electric moped with pedals fittings maintenance

Checking tire pressure and cleaning tire oil are the basics of daily maintenance

Too high or too low air pressure is not advisable. If the air pressure is too high, the vehicle will bounce excessively when driving, and if it is too low, it will not be able to drive normally. At the same time, the tire oil should be cleaned regularly to prevent the oil from penetrating into the rubber and causing swelling, resulting in the reduction of the rubber strength and the deterioration and aging of the tire. As the feet of a two-wheeled electric vehicle, in addition to the driving requirements for it, as a qualified car owner, you should always take good care of it.

Remember to tune the brake system and replace it

Equipment that is directly related to driving safety should still be carefully observed. The braking system is the most important thing. During our riding, the brake pads will inevitably wear out. We should always pay attention to the braking performance of electric vehicles during the use of electric vehicles. Once the braking effect is found to be poor, in order to avoid unnecessary safety accidents during driving , it is necessary to check and debug the electric vehicle brake system in time, or replace it in time.

Are the lights and horns working properly

As the eyes and ears of electric moped with pedals, how to see the four roads and listen to all directions depends on it. Therefore, in daily life, it is also necessary to regularly check whether the turning lights and headlights are working properly, whether the horn sound is working normally, including whether the electric vehicle switch is sensitive, etc. These details that are usually overlooked are often caused by improper maintenance. Safety accidents occur.

Check the front and rear brakes frequently

The so-called details determine success or failure, the more subtle, the more careful maintenance should be. If the electric brake skin is excessively worn, remember to replace it in time. Pay attention to whether the front and rear wheels rotate smoothly and smoothly, and the electric door lock should be turned off when not riding to avoid no-load power consumption of the controller, power indicator and other circuit components.

Battery powered electric moped with pedals supplier – JianShe

We are a company located in the production base of electric moped with pedals in Wuxi City of Jiangsu Province. With a long history of the brand which is the professional electric two-wheeler production enterprise. The company is in strict accordance with ISO9001 international quality system standards for the production of core products of high-tech, high-quality, high-efficiency.

Here, we recommend EB5 battery powered electric moped with pedals of our E-bike series. We hope you would like it.